NANODIY T-shirt's drukas tehnika

COLOR PRINT

NANODIY technology is based around the production of textile dye and binder which is activated by means of a color stabilizer. In contact with the stabilizer and the effect of temperature, the binders are activated and bind the pigments to the ground. NANODIY technology allows the binding of the color on cotton with very high adhesion and cost-effective production.

PIDĀVĀJAM iegādāties komplektus:

- Nanodiy Start Box Beginer (economical package - all-in-one for started t-shirt bussines) cena, euro: JAUTĀJIET!

- Nanodiy Start Box Basic (basic package ) cena, euro: JAUTĀJIET!

- Nanodiy Start Box PRO (Proffesional solutions ) cena, euro: JAUTĀJIET!

- Nanodiy Stabilizer PRO - 220g - smalest granulation, better adhesive performance cena, euro: JAUTĀJIET!

- Nanodiy stabilizer Dark - 100g - a base for printing vector graphics on dark fabrics cena, euro: JAUTĀJIET!

- Nanodiy NEO - foil in four basic colors (yellow, green, orange, pink) for light and dark fabrics cena, euro: JAUTĀJIET!

NANODIY starter kit

Get started with creating your own style.

This includes a in-depth service manual, a 50 pack of 8.5"x11" paper, all four inks (CMYK), funnels for easily pouring the inks into your printer, and the Standard Stabilizer, Gold Stabilizer, and Silver Stabilizer.

Instructions

Please click HERE to download a printable version of the instruction sheet.

Please click HERE to download our NanoDIY brochure, which includes step-by-step instructions, printer instructions, and technical advice.

Please click HERE to download the ICC profile to print with. This is very important to download and load into your printer preferences to get the best possible print quality, especially when using a Textile Foil application and applying to darker shirts.

PLEASE NOTE: For best results when using with foils or with the Vintage Stabilizer, pre-heat the printed sheet with stabilizer on it before pressing. This will allow all the stabilizer to bake off, and not actually apply to the fabric. You take the sheet with the ink and stabilizer and hold it under the heat press (without actually touching it to anything), and hold for approx. 90 seconds. Otherwise, the stabilizer will apply in places outside the actual printed design. This looks fine on a light colored shirt, but pressing it onto a dark shirt or using foil- all the unwanted bits of stabilizer will show.